Win-Test

for Project:

Welcome to the Bug Tracking System for the Win-Test contest logger. Things to note :

Feel free to report any bugs, however minor. To improve efficiency, please try to be as accurate as possible.

Please don't ask for feature requests here but on the mailing list.

Thanks for your help. Olivier F5MZN and Laurent F6FVY

Task #299 — Using OmniRig with MK2R+, two Elecraft K3s, Ctrl-S command not working properly.

Attached to Project— Win-Test
Opened by Robert A. Wilson (N6TV) - Wednesday, 10 Nov 2010, 6:23am
Bug Report
Radios
Unconfirmed
No-one
All
Medium
Normal
Current WT-4.x
Undecided
0% complete

WT 4.6 MK2R+ v.30 firmware Router 5.1.1.8600 Two Elecraft K3s at 38400 baud OmniRig 1.11 Elecraft K3.ini 2010.03.30

  1. SETUP [Enter]
  2. Set Radio1 and Radio2 to OmniRig and verify normal operation
  3. 3521 [Enter] to set VFO A of Radio 1 to 3521 kHz
  4. -3522 [Enter] to set VFO B of Radio 1 to 3522 kHz
  5. Press [-] [Enter] to disable split mode
  6. Press [*] key
  7. 7023 [Enter] to set VFO A of Radio 2 to 7023
  8. -7024 [Enter] to set VFO B of Radio 2 to 7024
  9. Press [-] [Enter] to disable split mode
  10. Press [*] to set focus to Radio 1
  11. Press Ctrl-S
  12. Bug: Radio1 VFO A is set to 7024 instead of 7023

MK2R port log shows incorrect commands being sent to Radio1:

FA00007024000; FR0; FA00007023000; FR0; IF;

Expected it to set FB00007024000; not FA000070240000;

OmniRig .ini file for K3 looks OK:

[pmFreqA] Command=(FA...........;) Value=2|11|vfText|1|0 ReplyLength=0

[pmFreqB] Command=(FB...........;) Value=2|11|vfText|1|0 ReplyLength=0

Bug must bet in the way the Win-Test code sets VFO B value when using the Ctrl-S command only.

This task depends upon

This task blocks these from closing

Comments (0) | Attachments (0) | Related Tasks (0/0) | Notifications (3) | Reminders (0) | History |

These users will receive detailed notifications whenever this task changes.