Win-Test

for Project:

Welcome to the Bug Tracking System for the Win-Test contest logger. Things to note :

Feel free to report any bugs, however minor. To improve efficiency, please try to be as accurate as possible.

Please don't ask for feature requests here but on the mailing list.

Thanks for your help. Olivier F5MZN and Laurent F6FVY

Task #294 — Inernal DVK mic audio is muted after switching from CW to Phone in a mult-mode contest

Attached to Project— Win-Test
Opened by Robert A. Wilson (N6TV) - Thursday, 30 Sep 2010, 3:11am
Bug Report
Voice Keyer
Unconfirmed
No-one
All
Medium
Normal
Current WT-4.x
Undecided
0% complete

Problem verified in WT-DEV 4.6.0 Rev 423

  1. Create a new DXpedition log or multi-mode contest log, such as the IARU
  2. SETUP [Enter]
  3. Voice Keyer - check \"Enable Sound Card\"
  4. Check \"Mute the microphone input when the DVK is playing\"
  5. UNCHECK \"Mute the microphone input when the DVK is not playing\"
  6. [OK]
  7. SSB [Enter]
  8. Press Shift-F1 and program a CQ message
  9. Press F1
  10. CQ plays normally over sound card output
  11. Using heaphdones plugged into the PC, speak into the microphone; audio is echoed to sound card output (so you can use VOX)
  12. CW [Enter]
  13. Press F1
  14. CW CQ plays OK
  15. SSB [Enter]
  16. Speak into microphone
  17. Bug: no audio comes out of the sound card at this point
  18. Press F1 - SSB CQ plays normally
  19. Speak into microphone
  20. Audio now comes out of the sound card OK

When switching from CW to phone, when using the internal DVK, the audio output of the sound card should be enabled immediately. You should not have to play a DVK message to re-enable it.

This task depends upon

This task blocks these from closing

Comments (0) | Attachments (0) | Related Tasks (0/0) | Notifications (3) | Reminders (0) | History |